Acer ARMC_3P User Manual page 50

38
Chat Area
Read-only text area showing the messages, which have been received so far,
including your own messages sent to others. The identity string of the sender
precedes each message.
Identity Label
Shows the identity string used to precede messages sent by this Chat Frame.
The first part of the identity string is the user ID that has been used to log into
the client system, i.e. the system the browser runs on. The second part,
behind the " @ ", is the hostname of the client system. The last part in round
brackets is the user who logged into the ARMC/3P . As displayed in Figure
33, it is the user "super" .
Chat Line
This is an editable text line, where a new message can be entered. Once the
Enter key is hit the message is broadcasted to every other connected party.
In case a connected user has not yet opened the Chat Frame, it will be
opened automatically in order to receive and display the delivered message.
Video Settings
Opens a panel for changing the ARMC/3P video settings. The ARMC/3P features
two different dialogs which influence the video settings.
Video Settings through the HTML Frontend
Select this option to enable local video port. This option decides if the local
video output of the ARMC/3P is active and passing through the incoming
signal from the host system.
The option Noise Filter defines how the ARMC/3P reacts to small changes in
the video input signal. A large filter setting needs less network traffic and
leads to a faster video display but small changes in some display regions
may not be recognized immediately. A small filter displays all changes
instantly but may lead to a constant amount of network traffic even if display
content is not really changing (depending on the quality of the video input
signal). All in all the default setting should be suitable for most situations.
Video Settings through the remote console
P U G
RODUCT SER UIDE