Table 6 Standard User Settings - Acer ARMC_3P User Manual

22
IP address
The IP address the ARMC/3P uses. This option is only available if IP
autocon- figuration is disabled.
Net mask
The net mask of the connected IP subnet. This option is only available if IP
autoconfiguration is disabled.
Gateway address
The IP address of the default router for the connected IP subnet. If you do not
have a default router, enter 0.0.0.0. This option is only available if IP
autoconfiguration is disabled.
Finally, you will be asked if the values are correct, and may adjust them if necessary.
After your confirmation the ARMC/3P performs a reset using the new values.
The ARMC/3P may be accessed using a standard Java enabled web browser. You may
use the HTTP protocol or a secure encrypted connection via HTTPS. Just enter the
configured IP address of the ARMC/3P into your web browser. The initial login settings are:
Parameter
Login
Password
Changing these settings to user specific values is strongly recommended and can be
done on the "User Management" page (see Chapter 5: User and Groups).
Between the ARMC/3P and the host, there are two interfaces available for transmitting
keyboard and mouse data: USB and PS/2. The correct operation of the remote mouse
depends on several settings which will be discussed in the following subsections.
To use the USB interface a correct cabling between the managed host and the
managing device is necessary. If the managed host has no USB keyboard support
in the BIOS and you have connected the USB cable only, then you will have no
remote keyboard access during the boot process of the host. Please see Chapter
5: Keyboard/Mouse for more details.

Table 6 Standard User Settings

Value
admin
password
P U G
RODUCT SER UIDE