User Management - Acer ARMC_3P User Manual

68

User Management

The configurable settings of the ARMC/3P are split into user settings (basically
authentication and user information) and group settings (authorization).
There is one predefined user "admin" and two predefined group "admin" and
"<unknown>", which cannot be renamed or deleted.
Each user may be member of one group and inherits permissions set for this group.
If a user is not member of a group, permissions can be set exclusively for that user.
The user "admin" is always member of admin group which has full system access.
The <unknown> group initially does not have any permissions, but is modifiable.
Users can authenticate against a remote authentication service (such as LDAP or
RADIUS). If this remote authentication service returns an invalid or no group
assignment, the user is considered to be member of the <unknown> group.
Upon delivery, the account for the user "admin" has the password "password".
Make sure to change the password immediately after you have installed and first
accessed your ARMC/3P.
A full list of available options follows. This list can only be seen by the admin.
Existing users
Select an existing user for modification. Once a user has been selected, click
the Lookup button to see the user information.
New User name
The new user name for the selected account.
Password
The password for the login name. It must be at least four characters long.
Confirm password
Confirmation of the password above.
Email address
This is optional.
Mobile number
This information may be optionally provided.
Dial-back number
This information may be optionally provided.
P U G
RODUCT SER UIDE