Acer ARMC_3P User Manual page 52

40
Undo Changes
Restore last settings.
Refresh Video
Use this option to refresh the video picture. The video data for the Remote Console
is updated completely.
On startup of the Remote Console, the ARMC/3P transmits the entire video picture
from the remote host. Subsequently, the parts of the video picture that did not
change are filtered and not transmitted, again. This leads to less video data to be
transmitted. It may happen that there are parts of the video picture that are not
updated correctly (video noise, compression errors). You may use this option to
initiate an entire refresh, manually.
Soft Keyboard
The Soft Keyboard simulates an entire keyboard that is connected to the remote
system. It is necessary in case your remote system runs with a completely different
language and country mapping than your administration machine. By selecting the
appropriate button(s) you can send key codes and also key sequences to the
remote system and act as if you would work with a keyboard that is directly
connected to the remote system.
In order to open the Soft Keyboard select the entry "Soft Keyboard" from the
Options menu. You can send single key strokes like F as well as combinations of
keys such as Ctrl+C or AltGr+Shift+F4.
For a single key stroke you can click on the button with the appropriate character.
Single keys such as regular characters and numbers are sent immediately. Special
keys like Ctrl, Shift as well as the function keys F1 to F12 have to be
selected twice. The first press sends the signal "key is pressed", the second press
sends the signal "key is released" to the remote system. After the first press the
button will change its color to indicate that the appropriate key is pressed, currently.
After the second press the button will appear as usual and indicate that the key
was sent.
To send the key combination Ctrl+C select the button Ctrl first. The button will
change its color. Press the button C. The following key (C in our example) will be
combined with the previously selected key. Both the buttons Ctrl and C are
released and the key combination will be sent to the remote system. The button
Ctrl will appear as normal (color change).
In order to send the key combination Ctrl+F5 three steps have to be taken.
Select the button Ctrl once and the button F5 twice. The last press will release
both buttons and send the key combination to the remote system.
In order to send the key combination AltGr+Shift+F4 four steps are required.
First, select the button AltGr once. Second, select the button Shift. Finally, choose
the button F4 twice. The last press will release all the buttons and send the key
combination to the remote system.
P U G
RODUCT SER UIDE