Functional Description - RADEMACHER DuoFern 9482 Instruction Manual

i
EN

6. Functional description

Lighting control
With the DuoFern 1-10V Controller, you can connect electronic
ballasts with a 1-10V interface and use them, for example, for
dimming and controlling LEDs, LED strips or fluorescent lamps.
An integrated relay switches the ballast on or off
(approx. 5 seconds) after reaching 0%.
Control of external devices with a 1-10V interface
External devices with a 1-10V (DC) interface (e.g. pumps, fans or
blowers, etc.) can also be connected and controlled.
Use in the DuoFern network
The DuoFern 1-10V Controller can be integrated into a DuoFern
network, for example, to use the range of functions of DuoFern
sensors and DuoFern transmitters, such as the HomePilot®.
Manual operation on site
An additional external switch / button can be connected to enable
manual operation on site.
13