Functional Description - RADEMACHER HomePilot Translation Of The Commissioning Instruction Manual

i

6. Functional description

The HomePilot® can be used to log on, set up and configure all
of the devices in a DuoFern network using the HomePilot® Smart
Home app or the user interface via the web browser on a com-
puter. The system can be used at any time to adapt the devices to
individual requirements.
Network port (LAN)
The HomePilot® must be connected to a free LAN port on a router
to be able to use it.
Accessing the user interface in a local network
Once it has been successfully connected, the user interface of the
HomePilot® can be accessed via the app on your mobile end units
or via the web browser on your computer.
The HomePilot® Smart Home app for Android or iOS products is
available from the appropriate app store.
Accessing the user interface using RADEMACHER's
"WR Connect" service.
The user interface of the HomePilot® can also be accessed world-
wide from any web-enabled end unit. It is necessary to register
free of charge and log on to the RADEMACHER server.
i
38
Some settings (e.g. the configuration of an IP cam-
era) are only possible in the local network.
EN