Related Manuals for RADEMACHER DuoFern Universal 9470-1
Summary of Contents for RADEMACHER DuoFern Universal 9470-1
- Page 1 DuoFern Universal Actuator 9470-1 (1-channel) Instruction manual for the electrical connection and for commissioning Item no. 3514 02 61 Type: 9470-1 VBD 623-3 (12.20)
-
Page 2: Dear Customer
Dear Customer, With your purchase of a DuoFern Universal Actuator 9470-1 you have chosen a quality product manufactured by RADEMACHER. Thank you for the trust you have placed in us. RADEMACHER products have been developed with the greatest possible convenience in mind. Having applied uncompromising quality standards and thorough testing, we are proud to be able to present this innovative product to you. -
Page 3: Table Of Contents
Contents Dear Customer, ..............2 This manual.................5 How to use this manual ..............5 Hazard symbols ..............6 Levels of danger and signal words ..........6 Symbols and depictions used ............7 Glossary - definition ................8 Included in delivery ............9 Overview and connections ..........10 Operating buttons and indicator light ........ - Page 4 Contents 10. Deleting all settings (reset) ........... 30 11. Dismantling ..............30 12. Simplified EU declaration of conformity ..... 31 13. Warranty terms and conditions ........31...
-
Page 5: This Manual
1. This manual..describes how to install, connect and commission the DuoFern Universal Actuator 9470-1. 1.1 How to use this manual ◆ Before you begin, please read this manual through completely and follow all the safety instructions. ◆ Please also read the instruction manuals of the accessories, if available, as well as the instructions of the respective con- nected appliance. -
Page 6: Hazard Symbols
2. Hazard symbols The following hazard symbols are used in this manual: Danger to life resulting from electric shock Danger area / dangerous situation 2.1 Levels of danger and signal words DANGER! This hazard will lead to serious injury or death if not avoided. WARNING! WARNING! This hazard may result in serious injury or death if not avoided. -
Page 7: Symbols And Depictions Used
2.2 Symbols and depictions used Depiction Description Procedures Itemisation ◆ 1) or a) Lists Further useful information Please read the respective manual... -
Page 8: Glossary - Definition
WR ConfigTool ◆ RADEMACHER software for programming the DuoFern Manual Control incl. automatic software updates for the DuoFern Manual Control HomePilot® ◆ The HomePilot® is a central controller unit for RADEMACHER radio products ◆ Extra-low voltage SELV ◆ Safety extra-low voltage... -
Page 9: Included In Delivery
3. Included in delivery Included in delivery a) 1 x DuoFern Universal Actuator 9470-1 incl. antenna b) 1 x instruction manual (not illustrated) -
Page 10: Overview And Connections
4. Overview and connections STATUS RADEMACHER DuoFern 1-Kanal Aktor 9470-1 Pos. Symbol Description Control input 230 V / 50 Hz / (on / off) Connection of an external switch / button for manual control on site Relay contact [ K ]... -
Page 11: Operating Buttons And Indicator Light
4.1 Operating buttons and indicator light STATUS RADEMACHER DuoFern 1-Kanal Aktor 9470-1 Pos. Symbol Description Connect button Logging on to the DuoFern radio network or a DuoFern transmitter STATUS Indicator light - status display green flashing Connection is active constantly... -
Page 12: Functional Description
5. Functional description Controlling electrical appliances With the DuoFern Universal Actuator 9470-1, you can connect and control electrical appliances (e.g. lighting, etc.) with up to a maximum of 3600 W. Use in a DuoFern network The DuoFern Universal Actuator 9470-1 can be integrated into a DuoFern network, for example, to use the range of functions of DuoFern sensors and DuoFern transmitters, such as the HomePilot®. -
Page 13: Functional Characteristics
9. Automatic dusk function on / off ● ● ● on / off 10. Sun function ● ● 11. Automatic sun function on / off on / off ● ● ● The "WR ConfigTool" software can be downloaded from our website at www.rademacher.de. - Page 14 17. Stairway time (pulse duration) *** 100 ms - 3276 s 3 minutes ● ● www. The "WR ConfigTool" software can be downloaded from our website at rademacher.de. *** Advanced switch-off warning for > 60 seconds and with uneven values...
-
Page 15: Description Of The Functions And Parameters
5.2 Description of the functions and parameters Light/device mode By switching between the light and the device mode, the behav- iour of the DuoFern Universal Actuator 9470-1 can be changed: The range of functions changes as follows: Switching commands of Device Light an external DuoFern transmitter... - Page 16 5.2 Description of the functions and parameters Stairway function (on / off) When the stairway function is active, the DuoFern Universal Actuator 9470-1 will switch off the controlled device again after the set "stairway time". An advanced switch-off warning for > 60 seconds and with uneven values can optionally be set.
-
Page 17: Technical Specifications
6. Technical specifications Mains connection [ L / N ] Mains supply 230 V / 50 Hz voltage: Consumption: Standby: < 0.5 W Control input [ E ] for an external manual switch / button on site Input voltage: 230 V (Ri = 200 kW) Relay output - load contact [ K ] Switching voltage: 230 V / 50 Hz... - Page 18 6. Technical specifications Relay output - load contact [ K ] Maximum switching Capacitive loads such as: capacity: electronic transformers, AC/DC transformer, e.g. for extra-low voltage lamps such as halogen lamps, LEDs, etc. 8 A / 1800 W Improper use can lead to serious injuries or property damage.
- Page 19 6. Technical specifications General information Permissible ambient -20 °C to + 55 °C temperature range: Dimensions (W x H x D): 48.7 x 45.7 x 19.8 mm Connecting terminals: Spring resistance connecting terminals (0.1 mm - 1.5 mm ) for solid conductors...
-
Page 20: Safety Instructions
7. Safety instructions The use of defective devices can lead to personal injury and damage to property (electric shock / short circuit). ◆ Never use defective or damaged devices. ◆ Check that the DuoFern Universal Actuator 9470-1 is intact. ◆ Consult our customer service department in the event that you discover damage, see page 32. -
Page 21: Improper Use
7.1 Intended use Radio systems that transmit on the same frequency can cause interference. 7.2 Improper use Using the DuoFern Universal Actuator 9470-1 for any other pur- pose than previously mentioned is not permissible. Improper use can lead to serious injuries or property dam- age. -
Page 22: Expert Knowledge Required By The Installer
7.3 Expert knowledge required by the installer The electrical connection, installation and commissioning of the DuoFern Universal Actuator 9470-1 must only be carried out by a qualified electrician in accordance with the instructions in this manual. 8. Connecting the DuoFern Universal Actuator 9470-1 Prior to the electrical connection, check that the voltage / frequen- cy on the type plate corresponds to that of the local mains supply. - Page 23 8.1 Safety instructions for the electrical connection WARNING! WARNING! Short-circuiting, caused when the DuoFern Universal Actuator 9470-1 is overloaded, poses a danger to life. ◆ The maximum switching capacity must not be exceeded. Please observe the details in the “Technical Specifications”, see page 18.
-
Page 24: Important Information Regarding The Electrical Connection
8.2 Important information regarding the electrical connection Connection instructions for operating with an external switch / button on site ◆ When using the control input [ E ], you must connect the external switch / button and the DuoFern Universal Actuator 9470-1 to the same phase [ L ]. -
Page 25: Connecting And Installing The Duofern Universal Actuator 9470-1
8.3 Connecting and installing the DuoFern Universal Actuator 9470-1 Ensure the mains is disconnected and check whether the mains power leads are current-free. Securely lay the connecting cables right into the flush-mounted box of the DuoFern Universal Actuator 9470-1. Remove the insulation on all leads as specified above and con- nect them according to the following connection diagram. -
Page 26: Connection Diagram
8.4 Connection diagram 230 V / 50 Hz Appliance N PE External switch / button Control input [ E ] STATUS RADEMACHER DuoFern 1-Kanal Aktor 9470-1 Neutral conduc- tor [ N ] Relay contact [ K ] Power supply [ L ]... -
Page 27: Installation Example
8.5 Installation example 230 V / 50 Hz Relay contact [ K ] Toggle switch Appliance STATUS RADEMACHER DuoFern 1-Kanal Aktor 9470-1 230 V / 50 Hz Control Relay input [ E ] contact [ K ] Installation with toggle switches We recommend replacing the toggle switch with several switch- es connected in parallel. -
Page 28: Logging Duofern Transmitters On / Off
9. Logging DuoFern transmitters on / off For the DuoFern Universal Actuator 9470-1 to be operated with a DuoFern transmitter, you must log each desired transmitter onto the DuoFern Universal Actuator 9470-1. You can log on a maximum of 20 DuoFern transmitters (e.g. DuoFern manual transmitter standard). -
Page 29: Logging On And Off Via Radio Code
9.1 Logging on and off via radio code You can control the DuoFern Universal Actuator 9470-1 directly using the radio code in order, for example, to be able to connect further DuoFern transmitters to the actuator after installation. You will find the radio code on the enclosed label and on the rear side of the DuoFern Universal Actuator 9470-1. - Page 30 10. Deleting all settings (reset) A reset can be carried out to reset the DuoFern Universal Actuator 9470-1 to the default factory settings. Press and hold the disconnect button for approx. 5 sec. until the STATUS LED constantly lights up red. All of the settings are deleted and reset to the default factory set- tings and the logged-on DuoFern transmitters are automatically logged off.
- Page 31 12. Simplified EU declaration of conformity RADEMACHER Geräte-Elektronik GmbH hereby declares that the DuoFern Universal Actuator 9470-1 complies with the Directive 2014/53/EU (Radio Equipment Directive). The full text of the declaration of conformity is available at the following website: www.rademacher.de/ce 13.
- Page 32 Proof of this must be provided by presenting a copy of the invoice. RADEMACHER will remedy any defects that occur within the war- ranty period free of charge either by repair or by replacement of the affected parts or by supplying a new replacement unit or one to the same value.