Description Of The 1-10V Interface - RADEMACHER DuoFern 9482 Instruction Manual

i

6.1 Description of the 1-10V interface

An electronic ballast or power supply with a compatible 1-10V
interface is controlled via a fail-safe DC voltage signal ranging
from 1 V to 10 V.
Ballasts / power supplies and the DuoFern 1-10V Controller are
interconnected via a polarised, two-core control cable.
The connection principle
230 V / 50 Hz supply voltage
14
RADEMACHER
DuoFern 1-10V
Steuergerät 9482
1-10V
Control lead
1-10 V (DC)
Active electronic
Second electronic
ballast connected
in parallel
STATUS
E L N
´
L N
Connected to a 230 V / 50 Hz
supply voltage
ballast
DuoFern 1-10V
Controller 9482
Fluorescent lamps
LEDs / pumps / fans,
etc.
Fluorescent lamps
LEDs / pumps / fans,
etc.
EN