JAI SW-4000Q-SFP User Manual page 8

② POWER/TRIG LED
Indicates the power and trigger input status.
LED status and camera status
LED
POWER/TRIG LED
③ SFP+ module
The camera supports 10GBASE-R Ethernet standards.
Requirements specification for SFP+ module.
1. Support 10GBASE-R
2. Support Power level 1
Depending on the Ethernet standard to be used, the cable type and the maximum cable
length are limited.
For details, refer to "Step 2 Connecting Devices".
Light
(Lit amber) Camera initializing.
SFP+ module not inserted
Not compatible SFP+ module inserted
The Ethernet Link has not been established
(Lit green) Camera in operation.
(Blinking green) During operation in trigger mode, trigger signals are
being input
* The blinking interval is not related to the actual input interval of the external
trigger.
— 8 —
Status
SW-4000Q-SFP