JAI SW-4000Q-SFP User Manual page 13

③ SFP+ module
Check the operation manual of the SFP+ module to be used, and attach it or remove it from
the camera.
The SFP+ module can be attached to and removed from the camera only when the camera is
turned off.
Note
・Many SFP+ modules and fiber optic cables are Class 1 laser products. Do not look into
connectors and cables when installing or removing. There is a risk of injury to eyes.
・Do not exceed the operational temperature of this camera and SFP+ module.
④ Fiber optic cable
The longest cable length varies depending on the type of 10GBASE-R standard and SFP+
module.
Below, the table shows the relationship diagram between fiber optic cable type and 10GBASE-R
standard.
Correctly select the fiber optic cable type according to the 10GBASE-R standard and SFP+
module to be used.
Maximum Fiber optic cable length
10GBASE-SR : 300m(Fiber optic cable type OM3), 400m(Fiber optic cable type OM4)
10GBASE-LR : 10km(Fiber optic cable type OS2)
10GBASE-ER : 40km(Fiber optic cable type OS2)
⑤ DC IN / trigger IN connection cable
⑥ AC adapter (power supply) (if necessary)
Connect the AC adapter and the round connector of the connection cable to the DC IN /
trigger IN connector on the camera.
— 13 —
SW-4000Q-SFP