JAI SW-4000Q-SFP User Manual page 49

Item
d） Analog Control
IndividualGainMode Off, On
GainSelector IndividualGainMode : On
IndidualGainMode : Off
Gain ー
Analog Gain Selector Analog Red,
Analog Green,
Analog Blue,
Analog NIR
AnalogBaseGain 0dB, 6dB, 12dB
BlackLevelSelector DigitalAll,
DigitalRed,
DigitalBlue,
DigitalNIR
BlackLevel DigitalAll -133〜255
DigitalRed -64〜 64
DigitalBlue -64〜 64
DigitalNIR -64〜 64
Balance White Auto Off,
Once,
Preset5000K,
Preset6500K,
Preset7500K
Balance White Auto Width 16〜4096 step 16
Balance White Auto OffsetX 0 〜 4080 step 16
Balance White Auto Result ー
Gamma 0.45, 0.5, 0.55, 0.6, 0.65,
0.75, 0.8, 0.9, 1.0
LUTMode Off, Gamma, LUT
SensorType TypeA, TypeB
Item
e） LUTControl
LUTSelector Red, Green, Blue, NIR
LUTIndex 0〜256
LUTValue 0〜4095
Setting range Default value
Off
ー
DigitalGreen,
DigitalRed,
DigitalBlue
DigitalAll,
DigitalRed,
DigitalBlue
x1.0
Analog Red
0dB
DigitalAll
DigitalAll 0
DigitalRed 0
DigitalBlue 0
DigitalNIR 0
Off
4096
0
Idle
0.45
Off
TypeA
Setting range Default value
Red
0
Gamma≒1.0
— 49 —
Description
Configure analog control setting
In IndividualGainMode, R, G, B, NIR can be configured individually for the
entire gain adjustment range of the sensor.
Select the gain to configure.
Set the gain value for the gain setting selected in [GainSelector].
[Setting Range]
IndividualGainMode Off : Digital All x 1
Digital Red x 0.63 〜 x 4
Digital Blue x 0.63 〜 x 4
Digital NIR x 0.63 〜 x 4
IndividualGainMode On︓ Digital Green x 1 〜 x 64
Digital Red x 1 〜 x 64
Digital Blue x 1 〜 x 64
Digital NIR x 1 〜 x 64
Select the analog gain to configure.
Set the gain value for the analog gain setting selected in [Analog Gain
Selector].
Select the black level to configure.
Set the black level value.
Enable/disable auto white balance.
Set the area for adjusting white balance.
Set the area for adjusting white balance.
Display the result for adjusting white balance.
0:Idle
1:Succeeded
2:Error1 - G image was too bright
3:Error2 - G image was too dark
4:Error3 - Timeout
Set the gamma value.
Select the LUT mode.
Select the size of pixel.
TypeA : 7.5um x 7.5um
TypeB : 7.5um x 10.5um
Description
Configure LUT settings.
Select the LUT channel to control.
Set the LUT index table number.
Set the LUT value.
SW-4000Q-SFP
〜 x 32 ( 0dB 〜30dB)
(-4dB 〜 12dB)
(-4dB 〜 12dB)
(-4dB 〜 12dB)
(0dB 〜 36dB)
(0dB 〜 36dB)
(0dB 〜 36dB)
(0dB 〜 36dB)