Warnings - Pilz PSEN sc L 3 Series Operating Manual

Operation
Message in the display
Icon Text
INTF18
INTF20
OSSD1F3
OSSDF1
10.3.2

Warnings

Message in the display
Icon Text
BOOTF
INTF6
EXTTEMP
OVERTEMP
HIGH REFL-
BKG
Operating Manual PSEN sc L 3/5 series
1005056-EN-01
Error/cause
An error occurred during the system
test.
An error occurred during the system
test.
Earth fault has occurred on OSSD1.
An error has occurred when testing
the OSSD1.
Error/cause
An error has occurred when starting
the system.
An error occurred during the system
test.
The ambient temperature is outside
the temperature range indicated in
the Technical details.
The temperature of the safety laser
scanner is outside the permitted
temperature range.
The reflection of the background is
too strong.
Description/measure
Perform a reset of the safety laser
scanner [ 81].
If the error persists, please contact
Pilz.
Perform a reset of the safety laser
scanner [ 81].
If the error persists, please contact
Pilz.
Check the EDM state and the
of the OSSDs [ 45].
If the error persists, please contact
Pilz.
Check the EDM state and the
of the OSSDs [ 45].
If the error persists, please contact
Pilz.
Description/measure
Perform a reset of the safety laser
scanner [ 81].
If the error persists, please contact
Pilz.
Perform a reset of the safety laser
scanner [ 81].
If the error persists, please contact
Pilz.
Ensure that the ambient temperature
is in the temperature range specified
in the Technical details [
Reduce the background reflection or
increase the safety distance (see
Distance to intense light sources and
to reflective surfaces [
wiring
wiring
86].
34]).
| 77