Table of Contents
Advertisement
Installation and alignment
7
Installation and alignment
7.1
Installation options
The safety laser scanner can be installed in various ways.
}
Installation directly at the mounting surface [
}
Installation with protective bracket PSEN sc bracket H [
}
Installation with PSEN sc bracket PR for inclination to the side or to the top or
bottom [
}
Installation with PSEN sc bracket P for inclination to the top and bottom [
7.2
Installation without PSEN sc bracket H
For direct installation of the safety laser scanner at the mounting surface, two threaded
holes are provided at the rear of the safety laser scanner.
Please note:
}
With direct installation of the safety laser scanner at the mounting surface, the accessory
PSEN sc bracket H cannot be used.
}
With direct installation of the safety laser scanner at the mounting surface, the safety
laser scanner cannot be inclined to the side or to the top/bottom.
}
Ensure that the front panel of the safety laser scanners is not covered by a wall or an-
other plane. Note the
}
To fix the safety laser scanner, use M5 screws for a max. screw depth of 10 mm.
Legend
[1] Mounting surface
[2] M5 screws
Operating Manual PSEN sc L 3/5 series
1005056-EN-01
55]
distance to the walls [
[2]
[1]
53]
54]
38].
57]
| 53
Advertisement
Table of Contents
