Operation; Display During Normal Operation - Pilz PSEN sc L 3 Series Operating Manual

Operation

10 Operation
10.1

Display during normal operation

Message in the display
Icon Text
CLEANW2
DLDNC
ITLOCK1
INPUTCF1
NOCONF
MUT
TIMEOUT
MUTING ERR Could not activate muting because
MUTING
OVERRIDE
ERR
Operating Manual PSEN sc L 3/5 series
1005056-EN-01
Status
The front panel must be cleaned
Download of a configuration or a re-
port
The status of the network is checked The status of the safety laser scan-
Safety laser scanner in interlock
condition
Faulty input
No configuration available
The wave function is activated.
Muting has elapsed (timeout).
the specifications for activating the
muting sensors were not met.
Muting on OSSD1 is active.
The OSSDs are in the ON state.
Could not activate override because
the specifications for activation were
not met.
Description/measure
Decommission the safety laser scan-
ner.
Clean the safety laser scanner's
front panel [ 82].
A configuration or a report is down-
loaded.
ner in the network is checked.
The safety laser scanner is in inter-
lock condition. Normal operation is
possible only after a successful re-
start of the safety laser scanner.
Faulty input, e.g. wrong number of
inputs that are used for switching the
zone sets.
No configuration for the safety laser
scanner could be found.
The symbol flashes. Select the
safety laser scanner in PSENscan
Configurator and configure it.
| 73