Mounting; Wall Mounting; Tabletop Placement; Rack Mounting - Extron electronics RGB-DVI 300 User Manual

Mounting

This section outlines the various mounting options available for the RGB-DVI 300,
RGB-HDMI 300, and RGB-HDMI 300 A:

Wall Mounting

Tabletop Placement

Rack Mounting

Under-desk Mounting
Through-desk Mounting
Wall Mounting
The form factor for the RGB-DVI 300, RGB-HDMI 300, and RGB-HDMI 300 A allows the
unit to be mounted on the wall, using the optional Extron MBU 125 under-desk mounting
kit (part # 70-077-01). This allows the unit to be concealed behind wall-mounted flat
screen monitors. To mount the scaler on the wall, follow the instructions provided with the
MBU 125 kit.
Tabletop Placement
Attach the four provided rubber feet to the bottom of the unit and place it in any
convenient location.
Rack Mounting

UL Guidelines for Rack Mounting

The following Underwriters Laboratories (UL) guidelines are relevant to the safe installation
of these products in a rack:
1.
2.
3.
4.
Elevated operating ambient temperature — If the unit is installed in a closed or
multi-unit rack assembly, the operating ambient temperature of the rack environment
may be greater than room ambient temperature. Therefore, install the equipment in
an environment compatible with the maximum ambient temperature (Tma: +122 °F,
+50 °C) specified by Extron.
Reduced air flow — Install the equipment in the rack so that the equipment gets
adequate air flow for safe operation.
Mechanical loading — Mount the equipment in the rack so that uneven mechanical
loading does not create a hazardous condition.
Circuit overloading — Connect the equipment to the supply circuit and consider the
effect that circuit overloading might have on overcurrent protection and supply wiring.
Appropriate consideration of the equipment nameplate ratings should be used when
addressing this concern.
RGB-DVI 300 and RGB-HDMI 300 (A) • Mounting 43