Extron electronics RGB-DVI 300 User Manual page 45

Command
Output scaler rate
Set output rate
View output rate
Video output format
Set
View
User presets
Save preset
Recall user preset
Input Presets
Save preset
Recall preset
The parameters saved in User Presets and Input Presets are:
User Presets
Contrast
Brightness
Detail
ASCII Command Response
(host to unit) (unit to host)
EX1% X1^ } X1%
* RATE Rate
E } X1%
RATE Rate
EX1& } X1&]
VTPO Vtpo
E } X1&]
VTPO Vtpo
X1* X1*]
1* , 1Spr
X1* X1*]
1* . 1Rpr
X1( X1(]
2* , 2Spr
X1( X1(]
2* . 2Rpr
Input Presets
H position Input type
V position Total Pixel
H size Contrast
V size Brightness
Zoom Detail
RGB-DVI 300 and RGB-HDMI 300 (A) • SIS Commands
Additional Description
X1^]
* Selects scaler output resolution
refresh rate
NOTE: An incompatible combination
of resolution and refresh rate
results in an error message.
See Table 1 on page 9.
X1^]
* View current output resolution and
refresh rate.
Sets the video output format (color space)
X1&
to (0 = RGB, 1 = YUV).
View current video output format.
Saves current settings for selected input
as user preset
NOTE: The final character of the
command is a comma (,).
Recalls user preset
selected input.
NOTE: The final character of the
command is a period (.).
Saves current settings as input preset
(1 to 16).
NOTE: The final character of the
command is a comma (,).
Recalls input preset
NOTE: The final character of the
command is a period (.).
H start H position
V start V position
H active H size
V active V size
Phase Zoom
X1%
and
X1^
(see tables on page 33).
X1*
(1 to 3).
X1*
(1 to 3) for
X1(
X1(
(1 to 16).
39