Extron electronics RGB-DVI 300 User Manual page 46

Command
Auto memories
Enable
Disable
View Auto Memory status
Test pattern
Set Test Pattern
View Test Pattern
Freeze
Enable
Disable
View freeze status
RGB delay time
Set delay time
View delay time
Front Panel Security Lockout (Executive Mode)
Enable
Disable
View front panel security
lockout status
Menu time out
Set menu time out
View menu time out
status
ASCII Command Response
(host to unit) (unit to host)
E }
1AMEM Amem1
E }
0AMEM Amem0
E }
AMEM Amem
EX2) } X2) ]
TEST Test
E } X2) ]
TEST Test
]
1F Frz1
]
0F Frz0
F X@]
Frz
EX2! } X2! ]
VDLY Vdly
E } X2! ]
VDLY Vdly
1X ]
Exe1
]
0X
Exe0
X X@]
Exe
EX2@ }
MDUR Mdur
E }
MDUR Mdur
RGB-DVI 300 and RGB-HDMI 300 (A) • SIS Commands
Additional Description
]
Sets auto memory on. Previous settings
for incoming signals are auto recalled.
]
Sets auto memory to off. Defaults to
input lookup table values are used to
configure input.
X@]
View current auto memory status
0 = Off (Disabled)
1 = On (Enabled)
Set test pattern to
patterns on page 34).
View current test pattern status.
Freezes input.
Unfreezes input.
Shows the current freeze status
0 = Off (Disabled)
1 = On (Enabled)
Set RGB delay time
of a second — 0 to 5 seconds).
View current RGB delay setting
Enables front panel security lockout (limits
front panel adjustments).
Disables front panel security lockout
(restores ability to make adjustments from
font panel).
View current front panel security lockout
status.
0 = Off (unlocked)
1 = On (locked)
X2@ ]
Sets the on-screen menu time out
default = 10 seconds.
(0 = menu never times out; 1 to 64 in
seconds).
X2@]
View the current menu time out status.
X@
.
X2)
(see list of test
X@
.
X2!
(0-50: in tenths
X2@
40