Extron electronics RGB-DVI 300 User Manual page 48

Command
Audio mute (RGB-HDMI 300 A only)
Mute on
Mute off
View current mute status
Audio gain and attenuation (RGB-HDMI 300 A only)
Set audio gain
Set audio attenuation
Increment audio level
Decrement audio level
View current audio level
Audio Delay (RGB-HDMI 300 A only)
Set audio delay
View audio delay status
NOTE: The RGB-HDMI 300 A automatically delays audio to compensate for any internal video processing. The
Audio Delay feature compensates for delays introduced by additional signal processors and display
devices in the system.
Audio Bit Depth (RGB-HDMI 300 A only)
Set audio bit depth
View audio bit depth
NOTE: This setting can be changed by SIS command only. There is no comparable option in the on-screen
menus.
ASCII Command Response
(host to unit) (unit to host)
1Z
Amt 1
0Z Amt 0
X2*]
Z Amt
X2( X3)]
G Aud
X3! X3)]
g Aud
+G X3)]
Aud
X3)]
-G
Aud
X3)]
G
Aud
E X3@ }
S ADLY Adly S
E }
S ADLY Adly S
E X3$ }
A BITD BitdA
E }
A BITD BitdA
RGB-DVI 300 and RGB-HDMI 300 (A) • SIS Commands
Additional Description
]
Mute the audio input
]
Unmute the audio input
Show mute status of the audio input (
0 = disabled 1 = enabled)
Sets the audio gain to
NOTE: The SIS commands for
Sets the audio attenuation to
Increments the audio level (
Decrements the audio level (
Shows the current audio level (
X3@]
Sets audio delay to
X3@]
View the current audio delay (
X3$]
Sets audio bit depth to
X3$]
Shows current audio bit depth setting
X2(
gain (G) and attenuation (g)
are case sensitive.
X3!
X3)
)
X3)
)
X3)
)
X3@
ms (0 to 255 ms)
X3@
ms)
X3$
(16 or 24)
X2*
:
42