Extron electronics 3G-AE 100 User Manual
Extron electronics 3G-AE 100 User Manual

Extron electronics 3G-AE 100 User Manual

Extron sdi audio extractor
Hide thumbs Also See for 3G-AE 100:

Advertisement

Quick Links

User Guide
Audio Extractor
3G-AE 100
SDI Audio Extractor
68-2477-01 Rev. A
08 13

Advertisement

Table of Contents
loading

Summary of Contents for Extron electronics 3G-AE 100

  • Page 1 User Guide Audio Extractor 3G-AE 100 SDI Audio Extractor 68-2477-01 Rev. A 08 13...
  • Page 2: Safety Instructions

    Safety Instructions Safety Instructions • English Chinese Simplified (简体中文) 警告: 产品上的这个标志意在警告用户该产品机壳内有暴露的危险 WARNING: This symbol, , when used on the product, is intended to alert the user of the presence of uninsulated dangerous voltage 电压, 有触电危险。 within the product’s enclosure that may present a risk of electric shock.
  • Page 3 FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
  • Page 4 Conventions Used in this Guide Notifications The following notifications are used in this guide: Attention indicates a situation that may damage or destroy the product or ATTENTION: associated equipment. NOTE: A note draws attention to important information. Specifications Availability Product specifications are available on the Extron website, www.extron.com.
  • Page 5: Table Of Contents

    Contents Introduction ............1 About the 3G-AE 100 ......... 1 Features ............. 1 Panels and Cabling ..........2 Front Panel Features ........... 2 Rear Panel Features and Cabling ......2 Operation ..............5 Audio Group Selection ........5 Reference Information ........
  • Page 6: Introduction

    Features About the 3G-AE 100 The Extron 3G-AE 100 extracts embedded audio from a 3G-SDI, HD-SDI, or SDI signal, converts digital audio to analog audio, and provides analog stereo audio to the output ports. Figure 1 shows a typical 3G-AE 100 application.
  • Page 7: Panels And Cabling

    7. Mounting ATTENTION: Turn the input and output devices off and unplug their power cords. Verify that the 3G-AE 100 is disconnected from the power source before proceeding. 3G-AE 100 • Panels and Cabling...
  • Page 8 Input equalization will allow signal transmission distances as follows: SDI: Up to 1400 feet (426 m) using RG6 cable • HD-SDI: Up to 600 feet (182 m) using RG6 cable • 3G-SDI: Up to 500 feet (152 m) using RG6 cable • 3G-AE 100 • Panels and Cabling...
  • Page 9 (-) terminal will damage the audio output circuits. Group Select DIP switch — see the Operation section on the next page for instructions on using the Group Select DIP switch. 3G-AE 100 • Panels and Cabling...
  • Page 10: Operation

    The 3G-AE 100 supports up to sixteen channels (eight stereo pairs) of embedded digital audio. SDI audio is divided into four groups; each group has four channels (two stereo pairs). When a group is enabled, its channels are extracted and routed to the 3G-AE 100 analog output ports.
  • Page 11: Reference Information

    Channel Label/ Group number number Name Description Cs/Center Rear wall surround surround loudspeakers Pair 5 SMPTE reserved SMPTE reserved Pair 6 SMPTE reserved SMPTE reserved Pair 7 SMPTE reserved User defined Pair 8 User defined 3G-AE 100 • Reference Information...
  • Page 12: Mounting

    Back of the Rack Mounting Procedure The 3G-AE 100 can be mounted to the rear of a rack using an optional back of rack mounting kit (see www.extron.com). The kit allows the product to be vertically mounted to the front or rear rack supports and facing either towards the front or the rear of the rack.
  • Page 13 Extron Warranty Extron Electronics warrants this product against defects in materials and workmanship for a period of three years from the date of purchase. In the event of malfunction during the warranty period attributable directly to faulty workmanship and/or materials, Extron Electronics will, at its option, repair or replace said products or components, to whatever extent it shall deem necessary to restore said product to proper operating condition, provided that it is returned within the warranty period, with proof of purchase and description of malfunction to: USA, Canada, South America,...

Table of Contents