Mitsubishi Electric MELSEC iQ-R Series Introduction Manual page 69

Adding log markers in GX VideoViewer to GX Works3
Add log markers to the positions where the program operation is to be checked in GX VideoViewer, and synchronize the
positions with the seek bar in GX Works3.
Operating procedure
1.
Since it has been determined that the workpiece height real number has effects in the data flow analysis, make log marks
at the positions where the workpiece heights are measured in GX VideoViewer. (Page 47 GX VideoViewer)
2.
Synchronize the log markers with the offline monitoring in GX Works3.
[Log Marker]  [Read]
7 OPERATION EXAMPLE
7.1 How to Check the Recording Result
7
68