Creating A Program - Mitsubishi Electric MELSEC iQ-R Series Introduction Manual

Creating a program

To record videos with the camera, creating the following two programs are required: one for setting the clock data of the CPU
module in the network camera and another for executing the video recording event set in the network camera. Using the FBs
of the camera recording package makes creating the sequence programs easy.
Three types of FBs are provided. The following table lists the purpose of each FB.
Name
M+CameraRecord_AXIS_SetTime_R (Clock setting)
M+CameraRecord_AXIS_EventTrigger_R (Video recording
before and after trigger)
M+CameraRecord_AXIS_VirtualInputControl_R (Video
recording during trigger ON)
For details on the FBs, refer to the following.
Camera Recording Package User's Manual
Registering the FB library
Register the FB library to be used to the program.
Operating procedure
1.
Display the "Register Library to Library List" window.
[Project]  [Library Operation]  [Register to Library List]  [Library]
Description
Sets the clock data of the CPU module to the network camera connected to the CPU module.
Records the video before and after the video recording trigger is turned on in the network camera
connected to the CPU module.
Controls the virtual input port status of the network camera connected to the CPU module to
record video while the video recording trigger is on or before and after the video recording trigger
is turned on.
(Use this function mainly when recording video while the video recording trigger is on.)
Click here to register
the FB library.
4 CAMERA RECORDING FUNCTION
4.2 Programmable Controller Setting
4
42