Introduction Flowchart - Mitsubishi Electric MELSEC iQ-R Series Introduction Manual

1.1

Introduction Flowchart

Configure the settings and check the operation with the following procedures. For details, refer to Chapter 2 and subsequent
chapters in this document.
Preparation
Recording function
Camera recording function
Offline monitor function
Data flow analysis function
Operation example
Do preparation such as wiring devices and inserting an SD memory card.
 Chapter 2
Configure the recording settings to use the recording function.
 Chapter 3
Connect the network camera and personal computer,
and configure the settings for recording and saving videos.
In addition, programs required for video recording are described.
 Chapter 4
Open the recording file saved with the recording function,
and monitor the operation of the program offline.
Chapter 5
Check which devices affect the operation of specific devices
throughout the program.
 Chapter 6
By using the caputred videos of the camera, the offline monitor function
of GX Works3, data flow analysis and GX LogView can be used to
inspect/analyse the cause of the error.
 Chapter 7
1 OVERVIEW
1.1 Introduction Flowchart
1
4