Vivotek CC9380-HV User Manual page 366

VIVOTEK
washer_status
washer_dwelltime
heater_supportstatus
heater_status
366 - User's Manual
N/A
N/A
N/A
N/A
"capability_peripheral_c<0~(n-1)>_washer_mod
e"
Get the current status of washer control module.
The status is 'off' as default, which means the
washer is stopped; and the status 'on' means the
washer is running.
*Only available when
capability_peripheral_c<0~(n-1)>_washer_supp
ort=1
Get the current washer clean period of washer
control system.
*Only available when
capability_peripheral_c<0~(n-1)>_washer_supp
ort=1
Get the support status of heater control system.
*Only available when
capability_peripheral_c<0~(n-1)>_heater_suppo
rt=1
Get the current heater status.
Normally it will be 'auto', it means the heater
device is control by internal algorithm to keep in a
suitable environment; Otherwise is 'trigger', it
means the heater device is force enable to heat to
an internal condition.'trigger' status will be
transfer to 'auto' after reach the internal condition.
*Only available when
capability_peripheral_c<0~(n-1)>_heater_suppo
rt=1