Vivotek CC9380-HV User Manual page 236

VIVOTEK
nanystream
iva
whitelight
iris
supportsd
fisheye
tampering
tamperingmode
236 - User's Manual
0, <positive 0/7
integer>
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
tamper,toodark,toob 0/7
A 32-bits integer, each bit can be set
separately as follows:
Bit 0 => 1st stream supports ePTZ or not.
Bit 1 => 2nd stream supports ePTZ or not,
and so on.
For nvideoin >= 2, the definition is different:
First all 32 bits are divided into groups for
channel.
Ex:
nvideoin = 2, bit 0~15 are the 1st group for
1st channel, bit 16~31 are the 2nd group for
2nd channel.
nvideoin = 3, bit 0~9 are the 1st group for
1st channel, bit 10~19 are the 2nd group for
2nd channel, bit 20~31 are the 3rd group for
3rd channel.
Then, the 1st bit of the group indicates 1st
stream of a channel support ePTZ or not. The
2nd bit of the group indicates 2nd stream of a
channel support ePTZ or not, and so on.
* For most products, the last stream of a
channel will not support ePTZ. It is reserved
for full view of the channel. For some
dual-stream products, both streams support
ePTZ.
number of any media stream per channel
Indicate whether to support Intelligent Video
analysis
Indicate whether to support white light led.
Indicate whether to support iris control.
Indicate whether to support local storage.
The parameter is used to determine whether
the product is fisheye or not.
Indicate whether to support tampering
detection.
Available tampering mode list.