Table of Contents
Advertisement
vadp
<product dependent>
valevel
valevel0
inter
weekday
begintime
endtime
lowlightcondition
<product dependent>
action_do_i<0~(ndo-1)>_e
nable
0,<positive integer>
6/6
0,1
6/6
0,1
6/6
1~999
6/6
0~127
6/6
hh:mm
6/6
hh:mm
6/6
0, 1
6/6
<boolean>
6/6
Indicate the source id of vadp event
notification.
Each bit corresponds to one vadp source, and
the LSB indicates source id 0.
For example, to detect event from any one of
source id 0, 1 and 3, set vadp to 11.
* Only available when vadp is listed in
"capability_supporttriggertypes"
Select audio detection event.
0: not select
1: select
Select audio detection profile event.
0: not select
1: select
Interval of snapshots in minutes.
This field is used when trigger condition is
"seq".
Indicate which weekday is scheduled.
One bit represents one weekday.
bit0 (LSB) = Saturday
bit1 = Friday
bit2 = Thursday
bit3 = Wednesday
bit4 = Tuesday
bit5 = Monday
bit6 = Sunday
For example, to detect events on Friday and
Sunday, set weekday as 66.
Begin time of the weekly schedule.
End time of the weekly schedule.
(00:00 ~ 24:00 sets schedule as always on)
Switch on white light LED in low light condition
0 => Do action at all times
1 => Do action in low-light conditions
Enable or disable trigger digital output.
* Only available when "capability_ndo" > 0
VIVOTEK
User's Manual - 293
- Quick Links:
- Network > General Settings
Hide quick links:
Advertisement
Table of Contents
