Vivotek CC9380-HV User Manual page 235

windowless
evctrlchannel
joystick
remotefocus
<Not recommended to use
this>
npreset
presettourdirection
eptz
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
0,<positive integer> 0/7
0, <positive 0/7
integer>
<boolean> 0/7
0, <positive 0/7
integer>
Bit 6 => (only available when bit0 is 1)
Reserved bit; always 0.
Bit 7 => (only available when bit0 is 1)
External or built-in PT;
0(built-in), 1(external)
Indicate whether to support windowless
plug-in.
Indicate whether to support HTTP tunnel for
event/control transfer.
Indicate whether to support joystick control.
An 4-bit integer, which indicates the
supportive application of remotefocus.
If the value of this parameter is larger than 0,
it means that the camera supports
remotefocus function.
bit 0 => Indicate whether to support both
zoom and focus function.
bit 1 => Only support zoom function.
bit 2 => Only support focus function.
bit 3 => Currently, this is a reserved bit,
and the default value is 0.
* It's strongly non-recommended to use this.
* This is reserved for compatibility and will
not be used after the version number
(httpversion) is equal or greater than 0400a.
* We replace "capability_remotefocus" with "
capability_image_c0_remotefocus".
Number of preset locations
Indicate whether to support preset tour
direction function. It means users can choose
which direction the preset tour goes.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0307a.
For "nvideoin" = 1, the definition is as
following:
VIVOTEK
User's Manual - 235