Vivotek CC9380-HV User Manual page 222

VIVOTEK
begintime
endtime
win_sensitivity
Group: motion_c<0~(n-1)>_profile_i<0~(m-1)>_win_i<0~(k-1)> for m profile and n channel product,
n denotes the value of "capability_nvideoin", m denotes the vaule of "capability_nmotionprofile",
k denotes the value of "capability_nmotion".
NAME
enable
name
polygonstd
objsize
sensitivity
<Not recommended to use
this>
polygonpx
<Not recommended to use
this>
222 - User's Manual
schedule
hh:mm 4/4
hh:mm 4/4
0 ~ 100 4/4
VALUE SECURITY
(get/set)
<boolean> 4/4
string[14] 4/4
0 ~ 9999,0 ~ 9999, 4/4
0 ~ 9999,0 ~ 9999,
0 ~ 9999,0 ~ 9999,
0 ~ 9999,0 ~ 9999
1 ~ 100 4/4
0 ~ 100 4/4
0 ~ W,0 ~ H, 0 ~ 4/4
W,0 ~ H, 0 ~ W,0 ~
H, 0 ~ W,0 ~ H
W: 0~ The current
image width -1
* Not support "policy=day" anymore when
the version number (httpversion) is equal or
greater than 0301a.
Begin time of schedule mode.
End time of schedule mode.
Sensitivity of all motion detection windows.
* The value "0" is reserved for compatibility
and will not be used after the version number
(httpversion) is equal or greater than 0400a.
DESCRIPTION
Enable motion detection window.
Name of motion window.
Coordinate of polygon window position.
(4 points: x0,y0,x1,y1,x2,y2,x3,y3)
* Only available when
"capability_motion_wintype" = polygon.
* Only available when std is listed in
"capability_motion_windomain
Percent of motion detection window.
Sensitivity of motion detection window.
* We replace "sensitivity" with
"win_sensitivity".
* This parameter will not be used after the
version number (httpversion) is equal or
greater than 0400a.
Coordinate of polygon window position.
(4 points: x0,y0,x1,y1,x2,y2,x3,y3)
* Only available when
"capability_motion_wintype" = polygon.