Vivotek CC9380-HV User Manual page 331

8.10 ePTZ Preset
capability_fisheye = 0)
Note: This request requires Operator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/operator/ePreset.cgi?channel=<value>&stream=<value>
[&addpos=<value>][&delpos=<value>][&return=<return page>]
PARAMETER VALUE
channel <0~(n-1)>
stream <0~(m-1)>
addpos <Text string less than
40 characters>
delpos <Text string less than
40 characters>
return <return page>
8.11 IP Filtering for ONVIF
Syntax:<product dependent>
http://<servername>/cgi-bin/admin/ipfilter.cgi?type[=<value>]
http://<servername>/cgi-bin/admin/ipfilter.cgi?method=add<v4/v6>&ip=<ipaddress>[&index=<value>]
[&return=<return page>]
http://<servername>/cgi-bin/admin/ipfilter.cgi?method=del<v4/v6>&index=<value>[&return=<return
page>]
PARAMETER VALUE
type NULL
allow, deny
method addv4
Locations(capability.eptz > 0 and
DESCRIPTION
Channel of the video source.
Stream.
Add one preset location to the preset list.
Delete preset location from the preset list.
Redirect to the page <return page> after the parameter is
assigned. The <return page> should be the relative path
according to the root of camera. If you omit this parameter, it will
redirect to an empty page.
* If the <return page> is invalid path, it will ignore this
parameter.
DESCRIPTION
Get IP filter type
Set IP filter type
Add IPv4 address into access list.
VIVOTEK
User's Manual - 331