Vivotek CC9380-HV User Manual page 190

VIVOTEK
s<0~(m-1)>_m 1~100
jpeg_cbr_qperc
ent
s<0~(m-1)>_m 20000~"capability_videoin_c<0~(n-1
jpeg_bitrate )>_mjpeg_maxbitrate"
s<0~(m-1)>_m framerate,imagequality
jpeg_prioritypoli
cy
s<0~(m-1)>_m 1~"capability_videoin_c<0~(n-1)>_
jpeg_maxframe mjpeg_maxframerate"
s<0~(m-1)>_ra <boolean>
tiocorrect
190 - User's Manual
100: Use the quality level in
"cbr_qpercent"
* Only available when
"ratecontrolmode"= cbr.
* Only available when
"capability_smartstream_version"="
2.0"
4/4 Select customized quality in a
normalized full range.
1: Worst quality
100: Best quality
* Only valid when
"ratecontrolmode"= cbr and
"quant"= 100.
* Only available when
"capability_smartstream_version"="
2.0"
4/4 The target bit rate in constant bit rate
mode.
* Only valid when
"ratecontrolmode"= cbr
4/4 Set prioritypolicy
* Only valid when
"ratecontrolmode"= cbr
1/4 The maximum frame rates of a
mjpeg stream at different
resolutions("capability_videoin_c<0
~(n-1)>_resolution") are recorded in
"capability_videoin_c<0~(n-1)>_mj
peg_maxframerate"
1/4 Change resolution to fit 4:3 ratio.
For PAL:
D1/4CIF(720/704x576) ->
(768x576)
CIF(352x288)->(384x288)
For NTSC:
D1/4CIF(720/704x480) ->