Vivotek CC9380-HV User Manual page 208

VIVOTEK
freeze
<product dependent>
deinterlace_enable
deinterlace_mode
xoffset
yoffset
profile_i<0~(m-1)>_enable
profile_i<0~(m-1)>_policy
profile_i<0~(m-1)>_begintime
profile_i<0~(m-1)>_endtime
profile_i<0~(m-1)>_brightness
208 - User's Manual
integer>
<boolean> 4/4
<boolean> 4/4
spatial,blend 4/4
0~100 4/4
0~100 4/4
<boolean> 4/4
night, 4/4
schedule
hh:mm 4/4
hh:mm 4/4
-5~5,100 4/4
according to mode settings
Enable/disable Image freeze while patrolling.
0: disable
1: enable
* Only available when
"capability_image_c<0~(n-1)>_freeze" is 1
Enable/disable deinterlace function.
0: disable
1: enable
* Only available when
"capability_image_c<0~(n-1)>_deinterlace_
support" is 1.
Users can choose between two different
deinterlacing techniques:
Spatical mode provides the best image quality,
while Blend mode provides better image
quality (than not using the deinterlace
function at all).
* Only available when
"capability_image_c<0~(n-1)>_deinterlace_
support" is 1.
Adjusting the image to proper position
horizontally.
* Only available when the bit 4 of
capability_image_c<0~(n-1)>_basicsetting is
1.
Adjusting the image to proper position
vertically.
* Only available when the bit 5 of
capability_image_c<0~(n-1)>_basicsetting is
1.
Enable/disable this profile setting
The mode which the profile is applied to.
* Not support "policy=day" anymore when the
version number (httpversion) is equal or
greater than 0301a.
Begin time of schedule mode.
End time of schedule mode.
-5: Darker <-> 5: Bright