Vivotek CC9380-HV User Manual page 352

VIVOTEK
zoom wide
tele
speedpan -5 ~ 5
speedtilt -5 ~ 5
speedzoom -5 ~ 5
zooming wide or tele
zs 0 ~ 6
vx -6 ~ 6
vy -6 ~ 6
vs 0 ~ 7
x <integer>
y <integer>
videosize <window size>
resolution <window size>
stretch <boolean>
return <return page>
352 - User's Manual
Zoom larger view with current speed.
Zoom further with current speed.
Set the pan speed of current command.
Set the tilt speed of current command.
Set the zoom speed of current command.
Zoom without stopping for larger view or further view with zs
speed, used for joystick control.
Set the speed of zooming, "0" means stop.
The direction of movement, used for joystick control.
Set the speed of movement, "0" means stop.
x-coordinate clicked by user.
It will be the x-coordinate of center after movement.
y-coordinate clicked by user.
It will be the y-coordinate of center after movement.
The size of plug-in (ActiveX) window in web page of 1O content.
The resolution of streaming of 1O content.
0 indicates that it uses resolution (streaming size) as the range
of the coordinate system.
1 indicates that it uses videosize (plug-in size) as the range of
the coordinate system.
Redirect to the page <return page> after the parameter is
assigned. The <return page> should be the relative path
according to the root of camera. If you omit this parameter, it will
redirect to an empty page.
* If the <return page> is invalid path, it will ignore this
parameter.