Vivotek CC9380-HV User Manual page 185

s<0~(m-1)>_h 1~100
264_cbr_qperce
nt
s<0~(m-1)>_h 20000~"capability_videoin_c<0~(n-1
264_bitrate )>_h264_maxbitrate"
s<0~(m-1)>_h framerate,imagequality
264_prioritypoli
cy
s<0~(m-1)>_h 1~"capability_videoin_c<0~(n-1)>_h
264_maxframe 264_maxframerate"
s<0~(m-1)>_h 0~2
264_profile
s<0~(m-1)>_h <boolean>
265_dintraperio
d_enable
"capability_smartstream_version"=2
.0
4/4 Select customized quality in a
normalized full range.
1: Worst quality
100: Best quality
* Only valid when
"ratecontrolmode"= cbr and
"quant"= 100.
* Only available when
"capability_smartstream_version"=2
.0
4/4 The target bit rate in constant bit rate
mode.
*
Only valid when
"ratecontrolmode"= cbr
4/4 Set prioritypolicy
*
Only valid when
"ratecontrolmode"= cbr
1/4 The maximum frame rates of a H264
stream at different
resolutions("capability_videoin_c<0
~(n-1)>_resolution") are recorded in
"capability_videoin_c<0~(n-1)>_h2
64_maxframerate"
1/4 Indicate H264 profiles
0: baseline
1: main profile
2: high profile
4/4 Enable "Dynamic intra frame period".
* Only available when
"capability_videoin_c<0~(n-1)>_di
ntraperiod_support" is 1 and h265 is
listed in "capability_videoin_codec".
* We support this parameter when
the version number (httpversion) is
equal or greater than 0301c.
VIVOTEK
User's Manual - 185