Vivotek CC9380-HV User Manual page 249

focusmode
Group: capability_ptz_c<0~(n-1)> n denotes the value of "capability_nvideoin"
(capability_ptzenabled > 0 and capability_camctrl_c<0~(n-1)>_zoommodule !=0)
* We support this group when the version number (httpversion) is equal or greater than 0303b.
PARAMETER
panspeedlv
minpan
maxpan
minpanangle
auto,onetimeauto,spo 0/7
tlight,manual
<product dependent>
VALUE SECURITY
(get/set)
0, <positive integer> 0/7
0, <positive integer> 0/7
0, <positive integer> 0/7
<integer> 0/7
Focus mode selection:
"auto": Camera will automatically adjust the
focus position full time to adapt a clear picture.
"onetimeauto": Camera will automatically
adjust the focus position one time, which
follows any PTZ control.
"spotlight": Camera will automatically adjust
the focus position full time, and to consider a
spotlight avoidance situation.
"manual": Turn off the automatically focus
function. For user to control the focus position
manually as their purpose.
* Only available when
"capability_camctrl_c<0~(n-1)_zoommodule"
is 1.
* We support this parameter when the version
number (httpversion) is equal or greater than
0304a.
DESCRIPTION
The maximum speed level of pan motion.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is
"1"
The lower limit for pan position.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is
"1"
The upper limit for pan position.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is
"1"
The lower limit for pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is
"1"
VIVOTEK
User's Manual - 249