Vivotek CC9380-HV User Manual page 221

<Not recommended to use
this>
width
<Not recommended to use
this>
height
<Not recommended to use
this>
Group: motion_c<0~(n-1)>_profile_i<0~(m-1)> for m profile and n channel product,
n denotes the value of "capability_nvideoin", m denotes the vaule of " capability_nmotionprofile ",
(capability_nmotionprofile > 0)
NAME
enable
policy
0 ~ 320 4/4
0 ~ 240 4/4
VALUE SECURITY
(get/set)
<boolean> 4/4
night, 4/4
* Only available when
"capability_motion_wintype" = rectangle.
* Only available when qvga is listed in
"capability_motion_windomain".
* It's recommended to use polygonsd
* This parameter will not be used after the
version number (httpversion) is equal or greater
than 0400a.
Width of motion detection window.
* Only available when
"capability_motion_wintype" = rectangle.
* Only available when qvga is listed in
"capability_motion_windomain".
* It's recommended to use polygonsd
* This parameter will not be used after the
version number (httpversion) is equal or greater
than 0400a.
Height of motion detection window.
* Only available when
"capability_motion_wintype" = rectangle.
* Only available when qvga is listed in
"capability_motion_windomain".
* It's recommended to use polygonsd
* This parameter will not be used after the
version number (httpversion) is equal or greater
than 0400a.
DESCRIPTION
Enable profile 1 ~ (m-1).
The mode which the profile is applied to.
VIVOTEK
User's Manual - 221