Vivotek CC9380-HV User Manual page 188

VIVOTEK
s<0~(m-1)>_h 20000~"capability_videoin_c<0~(n-1
265_bitrate )>_h265_maxbitrate"
s<0~(m-1)>_h framerate,imagequality
265_prioritypoli
cy
s<0~(m-1)>_h 1~"capability_videoin_c<0~(n-1)>_h
265_maxframe 265_maxframerate"
s<0~(m-1)>_h 0~2
265_profile
s<0~(m-1)>_m cbr, vbr
jpeg_ratecontro
lmode
s<0~(m-1)>_m 1~5,
jpeg_quant 99, 100
188 - User's Manual
* Only available when
"capability_smartstream_version"="
2.0"
4/4 The target bit rate in constant bit rate
mode.
* Only available when h265 is listed
in "capability_videoin_codec".
*
Only valid when
"ratecontrolmode"= cbr
4/4 Set prioritypolicy
* Only available when h265 is listed
in "capability_videoin_codec".
* Only valid when
"ratecontrolmode"= cbr
1/4 The maximum frame rates of a H265
stream at different
resolutions("capability_videoin_c<0
~(n-1)>_resolution") are recorded in
"capability_videoin_c<0~(n-1)>_h2
65_maxframerate"
* Only available when h265 is listed
in "capability_videoin_codec".
1/4 Indicate H265 profiles
0: baseline
1: main profile
2: high profile
* Only available when h265 is listed
in "capability_videoin_codec".
4/4 cbr: Constant bit rate mode.
vbr: Fixed quality mode, all frames
are encoded in the same quality.
4/4 * Only valid when
"ratecontrolmode"= vbr.
Set the pre-defined quality level:
1: Medium