Vivotek CC9380-HV User Manual page 186

VIVOTEK
s<0~(m-1)>_h 250, 500, 1000, 2000, 3000, 4000
265_intraperiod
s<0~(m-1)>_h cbr, vbr
265_ratecontrol
mode
s<0~(m-1)>_h 1~5,
265_quant 99, 100
s<0~(m-1)>_h 0~51
265_qvalue
s<0~(m-1)>_h 1~100
265_qpercent
186 - User's Manual
4/4 The time interval between two
I-frames (Intra coded picture).
The unit is millisecond (ms).
* Only available when h265 is listed
in "capability_videoin_codec".
4/4 cbr: Constant bit rate mode.
vbr: Fixed quality mode, all frames
are encoded in the same quality.
* Only available when h265 is listed
in "capability_videoin_codec".
4/4 Set the pre-defined quality level:
1: Medium
2: Standard
3: Good
4: Detailed
5: Excellent
100: Use the quality level in
"qpercent"
99: Use the quality level in "qvalue"
* Only available when h265 is listed
in "capability_videoin_codec" and
"ratecontrolmode"= vbr.
4/4 Manual video quality level input. The
Q value which is used by encoded
library directly.
* Only available when h265 is listed
in "capability_videoin_codec".
* Only valid when
"ratecontrolmode"= vbr and
s<0~(m-1)>_h265_quant = 99.
4/4 Select customized quality in a
normalized full range.
1: Worst quality
100: Best quality