Vivotek CC9380-HV User Manual page 175

enablepreview
7.8.1 Video input setting per channel
Group: videoin_c<0~(n-1)> for n channel products, and m is stream number
n denotes the value of "capability_nvideoin", m denotes the value of "capability_nmediastream"
NAME VALUE
cmosfreq 50, 60
mode 0 ~
"capability_videoin_c<0~(n-1)>_nm
ode"-1
whitebalance auto,
<product manual,
dependent> rbgain,
widerange,
outdoor,
indoor,
sodiumauto,
etc
(Available values are listed in
"capability_image_c<0~(n-1)>_wbm
<boolean> 1/4
takes 1/5s on the night, then sensor only
outputs 5 frame/s.
* Only available when
"capability_image_c<0~(n-1)>_exposure_
maxrange" != "-"
* Only valid when "piris_mode"=manual or
"irismode"=fixed
* Only available when
"capability_image_c<0~(n-1)>_exposure_r
angetype" is "twovalues".
Usage for UI of exposure settings. Preview
settings of video profile.
* Only available when
"capability_image_c<0~(n-1)>_exposure_
mode" !=0
SECURITY DESCRIPTION
(get/set)
4/4 CMOS frequency.
* Only available when "
capability_videoin_type " is 2
4/4 Indicate the video mode on use.
4/4 Modes of white balance.
"auto": Auto white balance
"rbgain": Use rgain and bgain to set
white balance manually.
"manual": 2 cases:
a. if "rbgain" is not supported, this
means keep current white balance
status.
b. if "rbgain" is supported, "rgain"
and "bgain" are updated to the
current values which is got from
VIVOTEK
User's Manual - 175