Mail Alert - BEC 7700N User Manual

Configuring Your Router
113
System – Mail Alert

Mail Alert

Mail alert is designed to keep system administrator or other relevant personnel alerted of any
unexpected events that might have occurred to the network computers or server for monitoring
efficiency. With this alert system, appropriate solutions may be tackled to fix problems that may have
arisen so that the server can be properly maintained.
WAN Port: Mail Alert feature can be applicable to every WAN mode: ADSL and EWAN. Select the
WAN interface you wish to receive the alerts.
For example DSL, then when the WAN connection is in DSL mode and when there is any unexpected
event, the alert message will be sent to your specified E-mail.
Apply all settings to: check whether you want to have a copy of the settings to apply to other WAN
port, suppose the above Main port is DSL, then if you enable this function, then Ethernet port will have
the same configuration.
SMTP Server: Enter the SMTP server that you would like to use for sending emails.
Username: Enter the username of your email account to be used by the SMTP server.
Password: Enter the password of your email account.
Sender's Email: Enter your email address.
SSL / TLS: Check to whether to enable SSL / TLS encryption feature.
Port: the port, default is 25.
Account Test: Press to test the connectivity and feasibility to your sender's e-mail.
Recipient's E-mail (WAN IP Change Alert): Enter a valid e-mail address to receive a message when
WAN IP address changed.
BEC 7700N User Manual