Mitsubishi Electric FR-F806-E Hardware Instruction Manual page 9

Product checking and accessories
1.1
Product checking and accessories
Unpack the product and check the rating plate and the capacity plate of the inverter to ensure that the model agrees with the
order and the product is intact.

Inverter model
Symbol Voltage class
4 400 V class
F R - F 8 4 6 - 00250 - E1 - 60 L2
Circuit board coating
Symbol
(conforming to IEC60721-3-3 3C2/3S2)
60 With
06 With
Rating plate
Inverter model
Input rating
Output rating
SERIAL
Country of origin

Specification differs by the type. Major differences are shown in the table below.
Type
FM
Terminal FM (pulse train output)
(terminal FM Terminal AM (analog voltage output
(0 to ±10 VDC))
equipped model)
Terminal CA (analog current output
CA
(0 to 20 mADC))
(terminal CA
Terminal AM (analog voltage output
equipped model)
(0 to ±10 VDC))
NOTE
• In this Instruction Manual, the inverter model name consists of the applicable motor capacity and the rated current value (SLD
rated current value of the F800 standard model).
(Example) FR-F846-00250(11K)

How to read the SERIAL number
Rating plate example
 
Symbol Year
Accessory
• Earthing (grounding) cable (1): For connection with a communication option. (Refer to
• CD-ROM (1): Including the Instruction Manual (Detailed) and other documents.
8
INTRODUCTION
Structure,
Symbol
functionality
00023 to 03610
IP55 compatible
6
model
0.75K to 160K Inverter rated capacity (kW)
Without
With
Monitor output
 
Month Control number
SERIAL
Symbol Description
Inverter rated current
(SLD rated current of the
F800 standard model) (A)
Symbol
L2 Built-in C2 filter
Built-in EMC filter
ON Sink logic
ON Source logic
The SERIAL consists of one symbol, two characters indicating the production
year and month, and six characters indicating the control number. The last digit
of the production year is indicated as the Year, and the Month is indicated by 1
to 9, X (October), Y (November), or Z (December).
∗1
Symbol Type
Communication type
E1 FM
E2 CA
FR-LU08-01
Initial setting
Control Rated
logic frequency frequency voltage
9999 (same as the
60 Hz
power supply voltage)
8888 (95% of the
50 Hz
power supply voltage)
page 58.)
Ethernet
Pr.19 Base