Mitsubishi Electric FR-F806-E Hardware Instruction Manual page 46

2.7.2
Outline of the Main monitor indicator
Symbol Name
a Main monitor item/data
b Rotation direction
c Operating status
d Clock
e Tuning status
USB connection/
f
password locked
PLC function/JOG
g
operation
h Warning
i Unit
j Operation mode
k Software key
l Scroll
(f)
Output frequency
(e) T U N E U S B - A
0. 00
(a)
(b)
STF STOP
(k)
PREV SET
(c)
Displays the output frequency, output current, output voltage, faults history, and others.
The Main monitor screen can be changed by the following methods.
• Shifting the Main monitor screen using
• Changing the main monitor item using the Function menu
• Changing the main monitor item using Pr.52 Operation panel main monitor selection
(For the details, refer to the Instruction Manual of the FR-LU08(-01).)
Displays the direction of the start command ([STF]: forward, [STR]: reverse).
([---] shows that no start command is input, or that both forward and reverse directions are ON.)
Displays the operating status of the inverter.
[STOP]: During stop
[FWD]: During forward rotation
[REV]: During reverse rotation
[JOGf]: During JOG forward rotation
[JOGr]: During JOG reverse rotation
[ALARM]: At fault occurrence
Displays time. With a battery installed, the clock keeps working even if the inverter power is turned
OFF. (For the details, refer to the Instruction Manual of the FR-LU08(-01).)
Displays the offline auto tuning status of the inverter.
[TUNE]: During turning or tuning completed
[TUNE] highlighted and flickering: Tuning error
Displays the connection status of the USB A connector of the inverter and password function setting
status.
[USB-A]: USB connection recognized
[USB-A] highlighted: USB ready
[USB-A] flickering: During USB operation
[LOCK]: Password locked
Displays the status of the PLC function and JOG operation.
[P.RUN]: During stop with the PLC function enabled
[P.RUN] highlighted: During PLC function operation
[P.RUN] highlighted and flickering: Operation error in the PLC function
[JOG]: JOG operation enabled
Displays an inverter warning.
Shows the unit of the value on the main monitor.
Displays the operation mode.
[AUTO]: AUTO (External) operation mode
[HAND]: HAND (PU) operation mode
[EXTj]: AUTOJOG (External JOG) operation mode
[PUj]: HANDJOG (PUJOG) operation mode
[NET]: Network operation mode
[PU+E]: AUTO (External) / HAND (PU) combined operation mode
Displays operations performed by pressing the F1 (left), F2 (center), or F3 (right) keys.
Displayed when any data can be scrolled by turning
Operation panel (FR-LU08-01)
(d)
1 2 : 3 4
▲
P . R U N (g)
(h)
O L
(i)
H z
(l)
▼
(j)
HAND
NEXT
(k)
Description
or
(NEXT)
(PREV)
.
INSTALLATION AND WIRING
2
45