Mitsubishi Electric FR-F806-E Hardware Instruction Manual page 137

FR-F800 Series
Instruction Manual Supplement
1
Cooling fan operation selection during the test
operation
The cooling fan can be stopped during PM motor test operation.
Pr. Name
Cooling fan
244
operation selection
Cooling fan
H100
operation selection
Cooling fan
operation selection
H106
during the test
operation
 Cooling fan operation selection during the test operation (P.H106)
• When P.H106 = "1" or Pr.244 = "1000, 1001, or 1101 to 1105", the cooling fan can be set to always OFF during PM motor test
operation.
Initial Setting
value range
0
1
101 to 105
1
1000
1001
1101 to
1105
0
1
1
101 to 105
0
0
1
Cooling fan ON/OFF control is disabled. (The cooling fan is always
ON at power ON)
The cooling fan operates at power ON.
Cooling fan ON/OFF control is enabled.
The fan is always ON while the inverter is running. During a stop,
the inverter status is monitored and the fan switches ON/OFF
according to the temperature.
Cooling fan ON/OFF control is enabled.
Set the cooling fan stop waiting time within 1 to 5 seconds.
Cooling fan ON/OFF control is disabled.
(The cooling fan is always ON at power
ON)
The cooling fan operates at power ON.
Cooling fan ON/OFF control is enabled.
The fan is always ON while the inverter is
running. During a stop, the inverter status
is monitored and the fan switches ON/OFF
according to the temperature.
Cooling fan ON/OFF control is enabled.
Set the cooling fan stop waiting time within
1 to 5 seconds.
Cooling fan ON/OFF control is disabled. (The cooling fan is always
ON at power ON)
The cooling fan operates at power ON.
Cooling fan ON/OFF control is enabled.
The fan is always ON while the inverter is running. During a stop,
the inverter status is monitored and the fan switches ON/OFF
according to the temperature.
Cooling fan ON/OFF control is enabled.
Set the cooling fan stop waiting time within 1 to 5 seconds.
The cooling fan operates according to the H100 setting during PM
motor test operation.
The cooling fan can be set to always OFF during PM motor test
operation.
1
Description
The cooling fan can
be set to always OFF
during PM motor test
operation.
BCN-C22005-929