Safety Instructions For Maintenance, Inspection And Assembly Works; Unauthorized Retrofit And Spare Parts Production; Inadmissible Operating Methods; Stopping The Stud Welder - Soyer BMS-6 Operating Instructions Manual

Persons with pacemakers must neither operate the stud welder nor stay near it.
If an accident happens,
• switch off the welding device and disconnect it from the mains supply
• call a doctor.

3.10 Safety instructions for maintenance, inspection and assembly works

Only carry out maintenance works when the welding equipment has been switched off
The user must ensure that all maintenance, inspection and assembly works are only
carried out by authorized and qualified technical personnel.
Generally, only work at the system when it has been switched off and after having
disconnected it from the mains supply. The safety instructions described in the
operating instructions have to be complied with.
Immediately after having completed your work, re-install and activate all safety and
protective devices.

3.11 Unauthorized retrofit and spare parts production

The system may only be retrofitted and modified after consultation with the
manufacturer. Original spare parts and accessories authorized by the manufacturer
guarantee safety. The use of other parts may result in the cancellation of warranty for
any consequences thus caused.

3.12 Inadmissible operating methods

Limit values
Working safety of the stud welding system supplied can only be guaranteed if the
system is used in accordance with its purpose. The limit values indicated in the
chapter "Technical data" must never be exceeded.

3.13 Stopping the stud welder

• Switch off the mains switch (item 7, chapter 5.1) at the rear side of the stud welder
• Disconnect the mains plug from the socket.
• Disconnect
- the control cable (item 4, chapter 5.1)
- the welding cable (item 5, chapter 5.1)
- the earth cable (item 6, chapter 5.1)
from the stud welder.
• Roll up the cables without buckling them.
20
MORTAL DANGER
BMS-6 ISO