Replace The Print Ribbon - Entrust SD260L User Reference Manual

SD-Series Card Printer

Replace the Print Ribbon

1. Press the latch button to open the printer cover.
2. Remove the print ribbon cartridge.
3. Remove the used ribbon spools from the ribbon cartridge.
4. Load a full roll of print ribbon (blue spool) onto the spindle closest to the
cartridge handle until it clicks into place.
5. Place the silver take-up spool on the spindle with the black gear until it
clicks into place.
6. Wind the take-up spool counterclockwise one full turn.
7. Replace the cleaning sleeve. Refer to
page 9.
8. Replace the print ribbon cartridge.
9. Close the printer cover.
8
Click
Click
"Replace the Cleaning Sleeve" on