Removing Load Securing Devices; Lifting The Cabinet Off The Transport Pallet - Siemens SINAMICS SH150 Operating Instructions & Installation Instructions

The units are packed by the manufacturers in accordance with the order.
In order not to damage open mounting parts (e.g. pipes and busbars), take the following
measures when removing the foil and the load securing devices:
● Remove the foil and load securing devices carefully.
● Remove the packaging immediately prior to installation. Protect the cabinets against dust
● Do not remove the safety instructions and center of gravity specifications from the cabinet.
4.4.2

Removing load securing devices

Danger to life as a result of fixing materials under tension
If fixing materials are released suddenly during opening and people get in the way, this could
result in bodily injury or death.
● Release the retaining straps before opening. Stay out of the way of the impact direction of
NOTICE
Material damage caused by incorrect removal of a load securing device
The load securing device protects the cabinet from any damage. If you remove the load
securing device improperly, the cabinet may sustain damage.
● Correctly remove the load securing device.
To extract the load securing device, proceed as follows:
1. Remove the retaining straps.
2. Remove the spacers such as wooden wedges, air cushions, etc.
4.4.3

Lifting the cabinet off the transport pallet

Use a crane to lower the transportation units from the transport pallets and transport them to the
installation site. Observe the guidelines described in the section "Transport with a crane."
SINAMICS SH150 6SL3805
Operating Instructions 05/2020
until they have been commissioned. To do this, cover the ventilation openings and keep the
doors closed.
WARNING
the retaining straps.
Preparations for use
4.4 Unpacking the cabinets
51