Components; Control Unit; Power Stack Adapter - Siemens SINAMICS SH150 Operating Instructions & Installation Instructions

Description

3.8 Components

3.8 Components
Further information is available in the following documents:
3.8.1

Control Unit

The CU320-2 PN Control Unit is the central control module of the drive's open-loop and closed-
loop control system. The connections are wired internally to the customer terminal block.
3.8.2

Power Stack Adapter

The Power Stack Adapter (PSA) acts as the physical interface between the power unit and the
open-loop/closed-loop controller. This is where the galvanic isolation (electrical coupling via
light) between the power unit and the open-loop controller takes place. Data is exchanged
between the Power Stack Adapter and the Control Unit via the DRIVE-CLiQ high-speed serial
communication interface.
32
● Additional information about connecting the various components is pro‐
vided in the circuit manual.
● You can find information on the interfaces and LEDs of individual com‐
ponents in the "Supplementary component descriptions
support.industry.siemens.com/cs/ww/en/view/109768128)" document.
(https://
SINAMICS SH150 6SL3805
Operating Instructions 05/2020