Siemens SINAMICS SH150 Operating Instructions & Installation Instructions page 107

8. Remove the two screws (M5 x 25)
9. Remove all screws (M8 x 20)
10.Remove the gating unit by withdrawing it to the front.
11.Remove the screws
SINAMICS SH150 6SL3805
Operating Instructions 05/2020
bank.
Figure 9-8 Removing a power cell, steps 8 - 10
⑨
Figure 9-9 Removing a power cell, step 11
⑦
between the heat sink and the housing of the capacitor
⑧
between the capacitor busbar and the gating unit.
(M4 x 10). Withdraw the plate towards the front.
Maintenance
9.7 Repair
107