Commissioning - Siemens SINAMICS PERFECT HARMONY GH150 Operating Instructions & Installation Instructions

Commissioning

7.1 Commissioning
Detailed information on commissioning and operating the device is provided in the
Commissioning Manual that addresses commissioning engineers.
Danger to life as a result of incorrect commissioning
Malfunctions can occur as a result of incorrect commissioning and parameterization. This can
result in premature failure and subsequent damage to the drive system. This can result in
death, serious injury or material damage. Incorrectly performed commissioning can result in
the warranty becoming null and void.
● Never commission the device if it is dirty or polluted. Immediately contact Customer
● This device may only be commissioned by electrically skilled persons who have been
● Obtain information about the range of SITRAIN training courses available through your
SINAMICS PERFECT HARMONY GH150 6SL38253AE412AA1-Z
Operating Instructions Rev.201910281231 EXAMPLE
WARNING
Support. You can find the relevant contact person under "Service & Support (Page 145)".
adequately trained on this product, and have experience with commissioning this product
and the associated plant and system components. The electrical technician
commissioning the equipment must be trained on the specific product as a result of the
differences between the individual products, e.g. regarding topology and closed-loop
control.
local contact person. Make use of the support and services offered by the responsible
Siemens Service Center when commissioning this equipment. You can find the relevant
contact person under "Service & Support (Page 145)".
7
93