Related Manuals for A-Neuvideo HD-88G
Summary of Contents for A-Neuvideo HD-88G
- Page 1 HD-88G 8x8 HDMI MATRIX SWITCHER INSTRUCTION MANUAL A-NeuVideo.com | Frisco, Texas 75034 (317) 456-2461...
- Page 2 SAFETY INFORMATION To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. Follow all instructions printed on unit chassis for proper operation. To reduce the risk of fi re, do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid. Make sure power outlets conform to the power requirements listed on the back of the unit.
-
Page 3: Table Of Contents
(8) HDMI inputs and (8) HDMI outputs and (1) preview output • Do not allow anything to rest on the power cabling or allow any (same as Output #01). The HD-88G is based on the HDMI standard weight to be placed upon it or any person walk on it. -
Page 4: Package Contents & Features
PACKAGE CONTENTS & FEATURES PACKAGE CONTENTS Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton: • Main switch console unit • RS-232 V2.0 Protocol Instructions • Ethernet V2.0 Protocol Instructions •... -
Page 5: Specifications
SPECIFICATIONS SPECIFICATIONS • Type of Switcher: 8x HDMI inputs to 8x HDMI outputs Matrix Switcher • HDMI Support: HD 1080p-@60Hz, H36-bit Deep color, 3D (1.4a) formats • HDCP / CEC Support: HDCP 2.0 Compliant, CEC Compliant • Video Bandwidth: Double Data Rates: 225Mhz, Total 6.75Gbps bandwidth •... -
Page 6: Front Panel
FRONT PANEL FRONT PANEL POWER SWITCH The power switch turns the unit on and off. The LED will illuminate red to indicate that the switcher is ON and is receiving power. The Switcher will remember that last state during a power cycle. When power is removed and resorted, the last confi... - Page 7 FRONT PANEL FRONT PANEL FUNCTION KEY - ALL Disables (mute) video on all destinations OR Selects the same source to all destinations. Option 1 - Press ALL followed by OFF button. The display will show “ 0 “ indicating all destinations have no video selected. Option 2 - Press ALL followed by Source 1 thru 8.
- Page 8 FRONT PANEL FRONT PANEL FUNCTION KEY - MEMORY The system will show store presets, up to a total of 16. Presets are stored in local memory using Source keys 1 thru 8 or Destination keys 1 thru 8 as the memory preset location.as the memory preset location. - Confi...
-
Page 9: Rear Panel
BACK PANEL BACK PANEL DC POWER INLET The Switcher is fi tted with a DC power plug input connector. Ensure Power Jack: DC Jack - Inner OD ᴓ 2.1mm (+ ) that the used is of an approved type and is of suffi cient current carrying Outside OD ᴓ... -
Page 10: Typical Application
TYPICAL APPLICATION INSTALLING DIAGRAM Sample connection using IR External , RS-232 series and Ethernet to control HD-88G switch, Also uses an IR Receiver and IR Transmitter with HDBaseT Transmitter & HDBaseT Receiver to control a projector. NOTE: 1. IR Control Projector Over HDBaseT Extender:... - Page 11 TYPICAL APPLICATION INSTALLING DIAGRAM Sample connection sending IR signal via HDBaseT Receiver (IR in) to HDBaseT Transmitters (IR out) to control a Satellite Receiver source. NOTE: 1. IR Control Satellite Receiver Over HDBaseT CAT5e/6/7 Extender from room: HDBaseT CAT5e/6/7 Transmitter HDBaseT CAT5e/6/7 Receiver 2.
-
Page 12: Remote Control
REMOTE CONTROL Before making any connections to the switcher. Observe the following: > Ensure the mains voltage supply matches the label on the > Connect all audio video sources and destination equipment supplied plug-pack (+/- 10%) > Power up all source and destination audio-visual sources >... - Page 13 REMOTE CONTROL IR REMOTE CUSTOM AND DATA CODES (NEC STANDARD) HOW TO SETUP IR CODES : Model number : HD-88G CUSTOM CODE : 857A POWER ON : 857A A15E POWER OFF : 857A A25D ALL : 857A B04F OFF :...
-
Page 14: Ir Extender
IR EXTENDER IR RECEIVER: 1. SB-100 IR 300M Receiver Device Cable (3C) IR Receiver (SB-100) R oHS /95/E C INP UT R S -232 IR E XT. in DC 12V IR Rx RS - 232 IR EXT . SB-100 SB-100 IR Receiver Set SB-100 Maximum Distance ~ 984 feet (300 meters) 2. - Page 15 IR EXTENDER IR EMITTER: 1. SB-101 IR 300M Transmitter Device Cable (3C) IR Transmitter (SB-101) IR out IR in CAT6/6a/7 DC 12V R oHS /95/E C IR Tx From OUTPUT Receiver Receiver SB-101 SB-101 IR Transmitter Set SB-101 Maximum Distance ~ 984 feet (300 meters) 2.
-
Page 16: Edid Function
EDID FUNCTION EDID FUNCTION SETUP EDID setup To change the EDID setup Step 1. Press the EDID button The display will show the currently selected EDID mode Step 2. Press SOURCE #1 or #2 button row The button will fl ash blue and the display will show the current Embedded EDID Status. - Page 17 EDID FUNCTION EDID function : 7x Embedded EDID Modes Fast Speed Start mode shortens the startup time of the switcher. Selecting ® Mode 1. FSS (Fast Speed Start) this mode does not force the EDID setup to be cancelled. Users may fi rst select one EDID mode from mode 2 to 3, and then select mode 1 for fast speed start.
- Page 18 EDID FUNCTION EDID FUNCTION : LEARNING Learning EDID Single to Single Example : Learn Destination #8 EDID To Source #5. The button will fl ash blue and the display will show the current Embedded EDID Press the EDID button Step 1. Status.
-
Page 19: Rs-232 Serial Interface
RS-232 RS-232 SERIAL INTERFACE PROTOCOL COMMANDS ( Ethernet / RS-232 Control driver V2.0 ) The HD-88G switcher can be controlled via the RS-232 serial control port to allow for interfacing to a PC, or similar third party control system. The serial communication parameters are 9600 baud, 8 bit, No Parity and 1 stop bit - this is often referred to as 9600 8N1. When the unit... - Page 20 ETHERNET SERIAL INTERFACE ETHERNET SERIAL INTERFACE CONNECT A PC OR CONTROL SYSTEM. VERSION COMPATIBLE V2.0 For a complete list of commands, please reference external document extended Ethernet Protocol Instruction Manual. ETHERNET SERIAL INTERFACE Pin Ethernet Reference TXOP TX + TXON TX - RXIP RX +...
- Page 21 BY, THROUGH OR UNDER A-NeuVideo, INC (COLLECTIVELY, THE “PRODUCT”). By using installing or using the Product, you unconditionally signify your agreement to these Terms and Conditions. If you do not agree to these Terms and Conditions, do not use the Product and return the Product to A-NeuVideo, Inc. at the return address set forth on the Product’s packing label at your expense.
Need help?
Do you have a question about the HD-88G and is the answer not in the manual?
Questions and answers