Installation
2.1 Cable connections
To connect the cables
1.
Connect one or more video source(s) to the corresponding video inputs. Use the appropriate video cable
(s) to do this.
The input source to be displayed can be selected in the OSD menus (see "Input source selection", page
19).
Image 2–1
2.
Connect the USB upstream connector to a PC USB host to make use of QAWeb or any of the display USB
downstream connectors (e.g. to connect a keyboard, mouse or other peripheral).
Image 2–2
3.
Connect the mains power input to a grounded power outlet.
Image 2–3
4.
If necessary for your application, earth the MDRC-2222 by connecting the earth pin to a grounded outlet
by means of a yellow/green AWG18 wire (maximum admitted cable length according to national regulation
requirements).
Image 2–4
12
K5902146 (451920612625) /04
Eonis