Barco Eonis MDRC-2222 WP User Manual page 7

Image 1–3
1. Display stand
2. Control wheel
- Push long (5 sec):
◦ to put display in standby mode
- Push short:
◦ to exit standby mode
◦ to active the OSD menu
◦ to confirm selections in the OSD menu
- Turn clockwise
◦ to scroll down in the OSD menu
◦ to increase values in the OSD menu
- Turn counter clockwise
◦ to scroll up in the OSD menu
◦ to decrease values in the OSD menu
3. Front sensor
4. Power status LED
- Off: Display not powered, or display is on but power LED function is disabled in OSD (see "Power
status LED", page 19)
- Steady green: Display operational
- Blinking green: Display is entering standby mode
- Steady orange: Display in standby mode
3
4
2
1
K5902146 (451920612625) /04
Welcome!
Eonis 7